Waste PCB recycling plant

Our Waste PCB recycling plant adopts a process route that makes raw materials such as PCB waste (printed circuit boards) to be a mixture of metal and resin fiber powder by dry crushing and pulverization and then separates the metals from the non-metal materials such as resin by high voltage electrostatic separator.To avoid dust pollution in the process,we already add some air cleaning equipments for the solution of the problem of dust pollution with every index up to the national standard.

【Raw material】: Computer boards,Radio boards,Cellphone boards,AC boards,etc.
【Capacity】: 300-500kg/h; 500-800kg/h; 800kg/h-1200kg/h

Shredder

Shredder is used to reduce the dimension of the material through cutting, tearing and extruding.It provides a good quality and reliable equipment for early broken of the waste recycling and volume reduction reatment.Double shaft shredder is widely used in waste plastic, waste rubber, wood and other big block waste broken.

Technical parameter:

Diameter of blade Type Power
(Kw)
Capacity
(kg/h)
Qty of blade
(piece)
Inlet Size
(mm)
200mm SG-500 7.5 200-400 16 700*760
SG-600 11 300-500 24 800*760
SG-800 22 400-700 32 1000*760
SG-800_2 15*2 500-900 32 1000*760
SG-1000 22*2 700-1000 40 1200*760
300mm SG-800 15*2 800-1000 16 1000*990
SG-1000 18.5*2 1000-1200 20 1200*990
SG-1200 22*2 1200-1500 26 1400*990
SG-1500 30*2 1500-1800 38 1700*990
400mm SG-800 18.5*2 1000-1200 16 1000*990
SG-1000 18.5*2 1200-1500 20 1200*990
SG-1200 22*2 1500-1800 26 1400*990
SG-1500 30*2 1800-2000 38 1700*990
SG-1680 37*2 2000-2500 42 1880*1090

High voltage electrostatic separator

High voltage electrostatic separator for PCB waste recycle plant adopt physical high voltage separating tech to separate metal-conductor and nometal-conductor.No air and water pollution ,the metal and nometal(resin or other plastic) can be separate effectively with 98-99% purity.

Technical parameter:

Type Power
(Kw)
Rotary Speed
(r/min)
Vibration Motor
(Kw)
Static Electricity
(Volt adjustable)
1001 1.5 20-300 0.75 50000-150000
1002 1.5 20-300 0.75 50000-150000
1003 1.5 20-300 1.1 50000-150000
1501 2.2 20-300 1.1 50000-150000
1502 2.2 20-300 1.1 50000-150000
1503 2.2 20-300 1.5 50000-150000
2001 3 20-300 1.5 50000-150000
2002 3 20-300 2.2 50000-150000
2003 3 20-300 2.2 50000-150000

Raw material:

Features of PCB waste recycle plant:

A. New process of advanced mechanical pulverization and high voltage electrostatic separation is adopted so that the purity of metal and non-metal separated after crushing and dissociation is high.
B. The unit consumption of energy to treat one ton of waste and used printed circuit board is only about 3/5 of that of domestic product alike; the largest treatment capacity of one set of equipment is 1 ton per hour.
C. The price of it is only 1/5-1/3 of the similar equipment at home and aboard, and the recovery rate of copper is about 3%-5% higher than other manufacturers of the sort.
D. It has good comprehensive performance, having special effect on computer board, calculator board, TV board and other control printed circuit board, and compatibility for recovery of various circuit boards with capacitor components.
E. less power, less manual operation and higher degree of automation. It improves the efficiency and become compact. Thus it is the most ideal production line to recycle waste and used circuit boards up to the present day.

Contact Us